Network Glossary
The networks shown on this web
page are configured using Netmgr. Netmgr uses the
information from the map to produce routing tables which
when loaded into the switches allows them to act
together in a network fashion.
The symbols used in Netmgr
represent the different type of operating systems (FPAC,
Rose, TNC, other network, etc.) used in the different
sites. The following gives a brief description for each
symbol:
This
symbol represents a FPAC Switch. A FPAC switch
consists of a PC, up to nine TNC's, radios and power
systems.
This symbol represents a Rose based switch. It consists
of TNC's connected together via a matrix, typically a
diode matrix. The TNC's have special code (Rose)
installed in the EPROM.
This
symbol represents a ghost site that is used for common
routing, such as 411 service. Using a ghost in the
routing with a very high quality factor causes the the
routing for 411 info to go to the nearest site connected
to the ghost. Thus each site can have it's own 411 info.
This
symbol represents an adjacent network that is
administered by the net administrator in that area.
This symbol
represents a user that is typically connected directly
to the network. In most cases it is a co-located BBS.
This
symbol represents a stand alone TNC that is used in the
network, such as an interface to a direct connection to
other areas.
|